Bucket Tile Grout
BUCKET TILE GROUT
Pre-Mixed Epoxy Grout, Ready Straight From the Bucket
Sentol Bucket Tile Grout is a pre-mixed epoxy grout supplied in a 3 kg bucket. Open the lid and it is ready to apply with a rubber float — no measuring, no water and no powder dust. The fine coloured-sand texture fills joints evenly across large areas, which makes it the practical choice for mosaics, ceramic and porcelain tile, and any project where a whole floor or wall is grouted in one go. Once cured the joint is waterproof, stain-resistant and keeps its colour, with the same durability as our cartridge grout in a format suited to bigger jobs.
Pre-mixed to a consistent paste in every bucket — open, apply with a float and wipe clean with a damp sponge.
Spreads fast across wide surfaces and fills narrow mosaic joints without gaps or colour variation.
Marked RG (reaction resin grout, EN 13888), R2T and EC1 low-emission on the packaging — stain-resistant and built for wet areas.
HOW IT WORKS
Spread, Press, Wipe — Built for Pools and Mosaics
Work the pre-mixed grout diagonally across the tiles with a rubber float so it packs fully into every joint, then wipe the surface clean with a damp sponge before it sets. Because the joints are epoxy, the finished pool or wet room stays waterproof and colour-fast under constant immersion, chlorine and sunlight — with none of the chalking or washout of cement grout.
Resists permanent immersion, pool chemicals and UV without losing colour or bond.
The smooth paste flows into narrow mosaic grids and large-tile joints alike, with no voids.
Sponge off excess while fresh — no haze left on the tile face.
COLOUR CHART — MATTE
Matte (Sanded) Finish — 20 Colours
Bucket Tile Grout comes in 20 colours with a matte finish, from whites, beiges and greys through to mocha, browns and pure black. The pre-mixed paste is fully pigmented, so the colour is uniform across the whole bucket and consistent from batch to batch. Custom colours can be matched for private-label orders.
